Step 2: Insert rod w/one set of buoys & sail attached through
the upper-upper set of holes making sure to slip on a hose clap beforehand.
Step 3: Slide one of the shorter rods through the lower set of holes making sure to slide on hose clamp on rod before slipping the rod after slipping the rod through the bottom sleeve of sail and BEFORE slipping the rod through the PVC pipe.
Step 4: Slide a hose clamps, sail, cotter pin, washer, set of buoys, washer, and cotter pin (in that order) on opposite side being sure to slip the lower end of the sail through the lower rod before securing the buoy system.
Step 5: Repeat steps 2-4 on the perpendicular set
of sails and rods.
Step 6 (Important): Double check to ensure all hose clamps, cotter pins, and washers are in place and secure